The biggest aircraft accident in Ahmedabad
The National President of the Council of Indian Aviation, Nitin Jadhav, said that the plane accident occurred in Ahmedabad, Gujarat, had come from Delhi. He rejected the possibility of pilot’s mistake. Nitin Jadhav immediately counted several possible reasons.
Nitin Jadhav said, “The aircraft takes a thorough investigation before the take-off and the pilot takes permission to fly only after clearance of the AMC (aircraft maintenance check), when he sits off to take off. In this case, the pilot’s fault is not visible in this case.”
Jadhav immediately gave three main possible reasons for the accident
First
The locking system would have been broken due to the plane overload and the load will be shifted to the last part after the take-off, causing load on the engine.
Second
According to him, the two engines cannot work simultaneously only if the pressure comes from overloaded, or the fuel could not reach the engine. Or there is a malfunction in the fuel, so the fuel should also be investigated.
third
He also expressed another possibility that the elevator of the tail side (previous part) of the plane stopped working while taking off, there was a malfunction.
Raised issue of runway length
He also said, “Nowadays, they are slightly shorted, so the runway should also increase the length of the runway.”
When asked if there could be a conspiracy behind the accident, Nitin Jadhav said, “The system can be locked from anywhere. However, it can lock GPS and the rest of the system, yet the engine does not stop and the aircraft can be securely landing.”
He emphasized that the aircraft fought from Delhi, so there could be no immediate problem in its technical investigation, but overloading, fuel quality and technical fault in elevator could be closed by both engines.
Also read-
Latest india news
